FillColor a shape using a push button

Solved933 viewsVisual Overview
2
2 Comments

Hi Dojo,

I have this visual overview where when I click the push button 'Go to Remote', the 'REMOTE MODE IS ON' shape should glow green. Similar for the Local mode as well. Here is what it looks like in Visio:

Here are the shape data fields of:

Go to Remote:

Remote Mode is on:

Go to Local:

Local mode is on:

1104 is the write parameter and 1004 is the read parameter taken from the driver.

Write:

Read:

However, in Cube if I click on any one push button, it asks me if I want to go to that mode and when I click Yes, the required shape does not get highlighted. I only see this when I hover my mouse pointer over the shape I want to get highlighted :

DDA282 is the name of the element. Can you please tell me if there are any mistakes? Thanks in advance.

Marieke Goethals [SLC] [DevOps Catalyst] Edited question 9th February 2021
Jens Vandewalle [SLC] [DevOps Enabler] commented

Hi Arunkrishna, which DM version are you using? I’m doing something similar on DM 10.1.2 where I don’t have problems.

3 Answers

4
6.25K 1 Comment

I verified with a local setup and the configuration of your visual overview is completely correct.

Important note for future reference being that the conditions do work on the discreet key value.

Further investigation showed though that the parameter OP was testing with wasn't being set correctly, thus the conditions couldn't work.

Arunkrishna Shreeder [SLC] [DevOps Enabler] Posted new comment 9th February 2021
1
16.30K 1 Comment

Hi Arunkrishna,

There is a nice feature that allow us to imitate the behavior of a button:
Design button with different four states

Using this feature together with Extended conditional shape manipulation actions should allow you to have different text (and color) displayed in the shape when pressed, imitating the action of pressing a button.

You can find an example about how to use this feature in DCP DMA (Linking Shapes -> Controls -> Button)

Arunkrishna Shreeder [SLC] [DevOps Enabler] Posted new comment 9th February 2021
Arunkrishna Shreeder [SLC] [DevOps Enabler] commented

Thank you Miguel for the suggestion.
1
9.29K 1 Comment

Hi Arunkrishna,

Can you try using the displayed value instead of the raw value in your condition?

Parameter: 1004|FillColor;=Local,#00FF00

Arunkrishna Shreeder [SLC] [DevOps Enabler] Edited comment 9th February 2021
Arunkrishna Shreeder [SLC] [DevOps Enabler] commented

Hi Jens, I tried Parameter: 1004|FillColor;=Local,#00FF00 for the ‘Local mode is on’ shape and it still does not get highlighted. The same thing happens when I hover the mouse pointer over it.