Question

Solved887 views17th July 2023spectrum analyzer

1

Jens Vandewalle [SLC] [DevOps Enabler]9.26K 11th January 2022 0 Comments

Hi Dojo,

I have a Agilent E4411B which I can ping over my network. The connector however shows a socket error in the stream viewer:

SOCKET ERROR : during opening port gpib0,10

Does someone knows why I have this error?

Marieke Goethals [SLC] [DevOps Catalyst] Selected answer as best 17th July 2023

2 Answers

4

Robbie Demaegdt [SLC] [DevOps Advocate]641 Posted 11th January 2022 1 Comment

Do you have the keysight I/O software installed and configured with the correct ports?

I had this issue before and it was due to my configuration but doens't know what was wrong in my config and I don't have that device anymore in my keysight software.

Here is a link to the dataminer help with information how to configure those GPIO ports.

https://help.dataminer.services/dataminer/#t=DataMinerUserGuide%2Fpart_4%2FSpectrumAnalysis%2FInstallation_and_configuration_of_a_spectrum_analyzer.htm

Marieke Goethals [SLC] [DevOps Catalyst] Selected answer as best 17th July 2023

Marieke Goethals [SLC] [DevOps Catalyst] commented 17th July 2023

Note that this information has been moved: https://docs.dataminer.services/user-guide/Advanced_Modules/Spectrum_Analysis/Installation_and_configuration/Installing_the_Keysight_Agilent_IO_Libraries.html

Note that this information has been moved: https://docs.dataminer.services/user-guide/Advanced_Modules/Spectrum_Analysis/Installation_and_configuration/Installing_the_Keysight_Agilent_IO_Libraries.html

score 0 · Answer 1 · 2022-01-11T07:00:29+00:00

Hi Jens,

Can you double check if the Keysight/Agilent IO Libraries were installed?
(DataMiner Help - Configuring the GPIB settings of a spectrum analyzer element)

Please also check if the following note (available in the above link) applies in your case:

Agilent E4411B – Socket error during opening port

2 Answers