What commands are required for Nexus 93180YC to integrate with Dataminer?

Solved1.45K views
0
2 Comments

Hello All,

I'm trying to create a dashboard using a Nexus 93180.
Please let me know what commands I need on the Nexus93180 side to do this.

"feature nxapi" could be adapted, others want to know.

Cheers,

Motoki

Marieke Goethals [SLC] [DevOps Catalyst] Selected answer as best 19th January 2024
Ive Herreman [SLC] [DevOps Enabler] commented

Hi Motoki,

Which driver are you using to integrate the Cisco Nexus into dataminer?
Are you using the SNMP/API based one, or the OpenConfig/GNMI based one?
Motoki Orikasa [DevOps Member] commented

Hi Ive,

I’m using the “Cisco Nexus” Driver!

1 Answer

0
13.52K 12 Comments

Hi Motoki,

Next to the 'feature nxapi' command, you'll also need to configure SNMP.

This can be done with the sample commands below:

snmp-server community public RO

snmp-server community private RW

Marieke Goethals [SLC] [DevOps Catalyst] Selected answer as best 19th January 2024
Motoki Orikasa [DevOps Member] commented

Hi Ive,

OK, it’s done!
Please check the show run snmp.

OTC-Nexus93180YC(config)# sh run snmp

!Command: show running-config snmp
!Running configuration last done at: Tue Oct 24 21:44:05 2023
!Time: Tue Oct 24 21:45:21 2023

version 10.3(1) Bios:version 05.47
snmp-server user admin network-admin auth md5 167B2E75E5E9FC3657ED2284586398F6026D priv aes-128 00743177CB99D3186BF94CD9566C9EE0463F localizedV2key
snmp-server host 192.168.102.230 traps version 2c public
snmp-server host 192.168.102.29 traps version 2c public
rmon event 1 log trap public description FATAL(1) owner PMON@FATAL
rmon event 2 log trap public description CRITICAL(2) owner PMON@CRITICAL
rmon event 3 log trap public description ERROR(3) owner PMON@ERROR
rmon event 4 log trap public description WARNING(4) owner PMON@WARNING
rmon event 5 log trap public description INFORMATION(5) owner PMON@INFO
snmp-server enable traps ospf
snmp-server enable traps callhome event-notify
snmp-server enable traps callhome smtp-send-fail
snmp-server enable traps cfs state-change-notif
snmp-server enable traps cfs merge-failure
snmp-server enable traps aaa server-state-change
snmp-server enable traps feature-control FeatureOpStatusChange
snmp-server enable traps sysmgr cseFailSwCoreNotifyExtended
snmp-server enable traps config ccmCLIRunningConfigChanged
snmp-server enable traps snmp authentication
snmp-server enable traps link cisco-xcvr-mon-status-chg
snmp-server enable traps vtp notifs
snmp-server enable traps vtp vlancreate
snmp-server enable traps vtp vlandelete
snmp-server enable traps bridge newroot
snmp-server enable traps bridge topologychange
snmp-server enable traps stpx inconsistency
snmp-server enable traps stpx root-inconsistency
snmp-server enable traps stpx loop-inconsistency
snmp-server enable traps system Clock-change-notification
snmp-server enable traps feature-control ciscoFeatOpStatusChange
snmp-server enable traps mmode cseNormalModeChangeNotify
snmp-server enable traps mmode cseMaintModeChangeNotify
snmp-server enable traps syslog message-generated
snmp-server enable traps lldp lldpRemTablesChange
snmp-server community public group network-operator
snmp-server community private group network-admin
Ive Herreman [SLC] [DevOps Enabler] commented

Hi Motoki,

This looks good.
Your dataminer element should work with this config.
Motoki Orikasa [DevOps Member] commented

Hi Ive,

Thanks for advice!

do you know the dashboard also?
Ive Herreman [SLC] [DevOps Enabler] commented

Hi Motoki,

I’m not sure. Which dashboard are you referring to?
Motoki Orikasa [DevOps Member] commented

Hi Ive,
it’s a dashboard that visually shows the linkup/down interface or PTP something status of NexusSW.
Show 7 more comments
You are viewing 1 out of 1 answers, click here to view all answers.