Does Dataminer support SNMPv3 HMAC-SHA-96 ?

Solved1.37K viewsSNMP
2
0 Comments

When defining the snmpv3 parameters of an element it’s possible to select the type of SHA that will be used for the Authentication algorithm. The SNMPv3 support the mode HMAC-SHA-96 but this option seems not available in the drop down menu of the element configuration.

Does the dataminer support the HMAC-SHA-96  mode ?

Marieke Goethals [SLC] [DevOps Catalyst] Selected answer as best 11th July 2023

1 Answer

4
5.03K 0 Comments

As far as I know, This is not supported by DataMiner. The below is an extract from the help:

Up to DataMiner 9.6.11, either HMAC-SHA or HMAC-MD5. From DataMiner 9.6.12 onwards, you can choose between MD5, SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512.

Also:

We recommend to use SHA-512 and AES-256, since this is the most secure combination. As such, this is the combination that is selected by default.

Marieke Goethals [SLC] [DevOps Catalyst] Selected answer as best 11th July 2023