The following parameter was added using MIB drag and drop.

Issue: The value not getting saved on the device. The current value on device is 172.0 and I am trying to write 180.0

Stream Log:

-> 17:14:45 – Set for parameter amplifierPortOutputPowerSet1 () to 180.000000
-> 17:14:45 – Set for amplifierPortOutputPowerSet1 () to value 180.000000 succeeded
Dynamic group for parameter 6000 [triggered by 1.3.6.1.4.1.1385.77.7.3.10.0](EXECUTE NEXT)
-> 17:14:45 – Get for amplifierPortOutputPowerSet1 () returned VT_R8 : 172.000000

Parameters Definition:

<Param id=“6000“ trending=“false“>

<Name>amplifierPortOutputPowerSet1</Name>

<Description>Amplifier Port Output Power Set1</Description>

<Information>

<Subtext>

<![CDATA[amplifierPortOutputPowerSet*10, Set Value of Output Optical Power, dBm*10]]>

</Subtext>

</Information>

<Type>read</Type>

<Interprete>

<RawType>numeric text</RawType>

<Type>double</Type>

<LengthType>next param</LengthType>

</Interprete>

<SNMP>

<Enabled>true</Enabled>

<OID type=“complete“>1.3.6.1.4.1.1385.77.7.3.10.0</OID>

<Type>integer32</Type>

</SNMP>

<Display>

<RTDisplay>true</RTDisplay>

<Positions>

<Position>

<Page>Amplifier Settings</Page>

<Column>0</Column>

<Row>9</Row>

</Position>

</Positions>

</Display>

<Measurement>

<Type>number</Type>

</Measurement>

</Param>

<Param id=“6100“ snmpSetAndGet=“true“>

<Name>amplifierPortOutputPowerSet1</Name>

<Description>Amplifier Port Output Power Set1</Description>

<Type>write</Type>

<Interprete>

<RawType>numeric text</RawType>

<Type>double</Type>

<LengthType>next param</LengthType>

</Interprete>

<SNMP>

<Enabled>true</Enabled>

<OID type=“complete“>1.3.6.1.4.1.1385.77.7.3.10.0</OID>

<Type>integer32</Type>

</SNMP>

<Display>

<RTDisplay>true</RTDisplay>

<Positions>

<Position>

<Page>Amplifier Settings</Page>

<Column>0</Column>

<Row>9</Row>

</Position>

</Positions>

</Display>

<Measurement>

<Type>number</Type>

</Measurement>

</Param>