Hi All,
I would like to set up a different audible alerts for individual elements. I am having an issue with cube not saving my settings in the individual element alarm consoles. Once I have an audible alert set (via the hamburger button) for the element, if I click to another element and back to the original, the settings I’ve changed have been removed. The only place these settings seem to save is in the main alarm console. Is it possible to save alarm console setting for individual elements? Specifically audible alerts?
Hi Steve,
The Alarm Console Audible alarms work off an Active Filtered Tab being opened with the saved filter applied to the tab. It sounds like you are working from the Active Alarm tab, so when changing elements, the settings follow the selected element. To accomplish what you are looking for you will need to setup an alarm filter for each element type, then open an alarm console tab for each saved filter created.
If you have not looked at it yet, you may find the Alerter Application to be a little easier to setup and maintain. This still requires the element filters to be created, but you will not need the multiple tabs open on the Alarm Console for proper operation and are able to set the filter to sound correlation from a single screen.
https://docs.dataminer.services/user-guide/Reference/DataMiner_Tools/DMS_Alerter.html
You can install the Alerter application by going to http://[dma ip]/tools
then select Alerter from Standalone Applications section.
Let us know if you have any questions.