Multi-Threaded SNMP Timers Issue
30th October 2020
Hi Everyone, I am building a Multi-Threaded SNMP Driver that is able to retrieve SNMP tables. I am using the “:tablev2” suffix to define the table columns Parameter in the …
Brand new Dataminer installation without Administrator account
30th October 2020
I have a brand new Dataminer installation using the installer available in Dojo. I have followed all the steps of the installer (executed with my Local User which is an …
Alarm events – time to live
29th October 2020
I can overwrite the TTL (Time To Live) of the alarm events (DM Cube/System Center/System Settings/time to live) but I wonder if it will have also an impact on how …
Visual Overview Execute in Show
28th October 2020
In Visual Overview, I’d like to show an Execute button with tooltip when a condition is met. The subshape has the following shape data: Execute: Script:ASI Signal Routing|matrix=abcde|input=something||Connect input to …
What is the rootalarmID of an alarm group?
28th October 2020
When Automatic Incident tracking is enabled, alarms are grouped. These “Alarm Group” alarms are basically new alarms, but they do not always have an alarmID that is equal to their …
Monitoring system logs
28th October 2020
Is there a DataMiner driver being able to extract system logs from a certain application of broadcast equipment like (Vizrt or VSM), analyze it, and send a real-time notification with …
What is the “max-repetitions field in the BulkPDU” for? In a Qaction using NT_SNMP_GET(295)
27th October 2020
In an implementation through Qaction of SNMP polling, there is a value in the configuration array (ElementInfo), I would like to know what this refers to. “elementInfo[13]: (int) Specifies the value …
Error during build of cookie 299, but there is an assembly meaning?
27th October 2020
I am getting this error seemingly randomly in the logging, and it doesn’t appear to be affecting anything. In addition there are protocolscript warnings that indicate an invalid number. Does …
Hide data display page (Web Interface)
27th October 2020
I can’t open a specific web-interface for some of my elements that are running Huawei Manager protocol. Is it possible to configure an Information Template to hide this page? I’m …
Reporting Customization – TOP lists sorting
27th October 2020
Hello Everybody. hope you all are doing fine. We´re doing some custom reporting inside Our cluster and have been able to set a lot of parameters and selecting only what …
Visual Overview – Have shape blink based on element State Active
27th October 2020
We would like to have a shape Blink when polling is active (Element State is Active). We are able to have the Visio shape display the current State using the …
Incorrect PortSetting after element creation
27th October 2020
After element creation we noticed that the newly created element was not polling. After some investigation the element settings seem to be incorrect. When retrieved with the client test tool …
Can i disconnect a user when they not login in from an approved machine
27th October 2020
Hi, We have a production setup where we have a few generic logins for our operation for the 24/7 always available machines. However sometimes this users are being used on …
Does Dataminer support SNMPv3 HMAC-SHA-96 ?
27th October 2020
When defining the snmpv3 parameters of an element it’s possible to select the type of SHA that will be used for the Authentication algorithm. The SNMPv3 support the mode HMAC-SHA-96 …
Where can we check element connections?
27th October 2020
It looks like the element connection from one of the elements is not passing the data to the destination element correctly. Where can I investigate the actual data. Is that …