Hello,
I am using Dataminer v10.1 and Cisco Manager driver v 5.1.5.1 to poll a Cisco C9300-48T switch.
I am getting some information, but the "general" tab info is not populated. Anyone have a work around for this?
Hi Jonathan,
I can confirm SNMP is set up and community and defined for RO not RW.
I saved a few minutes of data from stream viewer and will post a screenshot.
Thank You for getting back.
VT_BSTR : 4
4 VT_BSTR : 5…
1 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : GigabitEthernet0/0
1 VT_BSTR : Bluetooth0/4
2 VT_BSTR : Null0
3 VT_BSTR : unrouted VLAN 1
4 VT_BSTR : unrouted VLAN 1002…
2 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 6.000000
1 VT_R8 : 6.000000
2 VT_R8 : 1.000000
3 VT_R8 : 135.000000
4 VT_R8 : 135.000000…
3 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 1500.000000
1 VT_R8 : 1500.000000
2 VT_R8 : 1500.000000
3 VT_R8 : 1500.000000
4 VT_R8 : 1500.000000…
4 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 100000000.000000
1 VT_R8 : 100000000.000000
2 VT_R8 : 4294967295.000000
3 VT_R8 : 0.000000
4 VT_R8 : 0.000000……
-> 16:12:33 – Get for cpmCPUTotalTable () returned VT_ARRAY|VT_VARIANT (20)
0 VT_ARRAY|VT_VARIANT (4)
0 VT_BSTR : 19
1 VT_BSTR : 20
2 VT_BSTR : 21
3 VT_BSTR : 22
1 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1000.000000
1 VT_R8 : 2000.000000
2 VT_R8 : 3000.000000
3 VT_R8 : 4000.000000
2 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 0.000000
3 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 0.000000
3 VT_R8 : 1.000000
4 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 1.000000…
-> 16:04:44 – Get for xdsl2LineTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2LineBandTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2ChannelStatusTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2SCStatusTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2LineInventoryTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2PMLineCurrTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2PMLineInitCurrTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2PMChCurrTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslSpanConfTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslSpanStatusTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslInventoryTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslEndpointConfTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslEndpointCurrTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslEndpointMaintTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslUnitMaintTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for c3gWanCommonTable () had error : TOO BIG
-> 16:04:45 – Continuing get for c3gWanCommonTable ()
-> 16:04:45 – Get for c3gGsmRadioTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for cwceLteRadioTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for c3gCdma1xRttRadioTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:46 – Get for c3gCdmaEvDoRadioTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:03 – Get for ifTable () returned VT_ARRAY|VT_VARIANT (20)
0 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : 1
1 VT_BSTR : 2
2 VT_BSTR : 3
3 VT_BSTR : 4
4 VT_BSTR : 5…
1 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : GigabitEthernet0/0
1 VT_BSTR : Bluetooth0/4
2 VT_BSTR : Null0
3 VT_BSTR : unrouted VLAN 1
4 VT_BSTR : unrouted VLAN 1002…
2 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 6.000000
1 VT_R8 : 6.000000
2 VT_R8 : 1.000000
3 VT_R8 : 135.000000
4 VT_R8 : 135.000000…
3 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 1500.000000
1 VT_R8 : 1500.000000
2 VT_R8 : 1500.000000
3 VT_R8 : 1500.000000
4 VT_R8 : 1500.000000…
4 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 100000000.000000
1 VT_R8 : 100000000.000000
2 VT_R8 : 4294967295.000000
3 VT_R8 : 0.000000
4 VT_R8 : 0.000000……
-> 16:05:03 – Get for cpmCPUTotalTable () returned VT_ARRAY|VT_VARIANT (20)
0 VT_ARRAY|VT_VARIANT (4)
0 VT_BSTR : 19
1 VT_BSTR : 20
2 VT_BSTR : 21
3 VT_BSTR : 22
1 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1000.000000
1 VT_R8 : 2000.000000
2 VT_R8 : 3000.000000
3 VT_R8 : 4000.000000
2 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 0.000000
4 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 1.000000…
-> 16:05:03 – Get for cErrDisableIfStatusTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimInterfaceTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimJoinPruneInterval () returned VT_R8 : 60.000000
-> 16:05:28 – Get for pimNeighborTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimIpMRouteTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimIpMRouteNextHopTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimRPSetTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:29 – Get for pimCandidateRPTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:29 – Get for pimComponentTable () returned VT_ARRAY|VT_VARIANT (5)
0 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : 1
1 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : 0.0.0.0
2 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 0.000000
4 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 2.000000
-> 16:05:29 – Get for pimRPTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:29 – Get for cvVrfTable () returned VT_ARRAY|VT_VARIANT (7)
0 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : 1
1 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : Mgmt-vrf
2 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 1.000000
4 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : @…
-> 16:05:29 – Get for cvVrfListTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:29 – Get for cvVrfInterfaceTable () returned VT_ARRAY|VT_VARIANT (5)
0 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : 1.1
1 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 3.000000
2 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 3.000000
4 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 1.000000
-> 16:05:29 – Get for cvInterfaceTable () returned VT_ARRAY|VT_VARIANT (3)
0 VT_ARRAY|VT_VARIANT (264)
0 VT_BSTR : 1
1 VT_BSTR : 2
2 VT_BSTR : 3
3 VT_BSTR : 9
4 VT_BSTR : 10…
1 VT_ARRAY|VT_VARIANT (264)
0 VT_R8 : 2.000000
1 VT_R8 : 2.000000
2 VT_R8 : 2.000000
3 VT_R8 : 2.000000
4 VT_R8 : 2.000000…
2 VT_ARRAY|VT_VARIANT (264)
0 VT_BSTR :
1 VT_BSTR :
2 VT_BSTR :
3 VT_BSTR :
4 VT_BSTR : …
-> 16:05:32 – Get for cefcFanTrayStatusTable () returned VT_ARRAY|VT_VARIANT (2)
0 VT_ARRAY|VT_VARIANT (12)
0 VT_BSTR : 1017
1 VT_BSTR : 1018
2 VT_BSTR : 1019
3 VT_BSTR : 2017
4 VT_BSTR : 2018…
1 VT_ARRAY|VT_VARIANT (12)
0 VT_R8 : 2.000000
1 VT_R8 : 2.000000
2 VT_R8 : 2.000000
3 VT_R8 : 2.000000
4 VT_R8 : 2.000000…
-> 16:05:33 – Get for cefcFRUPowerStatusTable () returned VT_ARRAY|VT_VARIANT (6)
0 VT_ARRAY|VT_VARIANT (8)
0 VT_BSTR : 1015
1 VT_BSTR : 1016
2 VT_BSTR : 2015
3 VT_BSTR : 2016
4 VT_BSTR : 3015…
1 VT_ARRAY|VT_VARIANT (8)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 1.000000
4 VT_R8 : 1.000000…
2 VT_ARRAY|VT_VARIANT (8)
0 VT_R8 : 2.000000
1 VT_R8 : 2.000000
2 VT_R8 : 2.000000
3 VT_R8 : 2.000000
4 VT_R8 : 2.000000…
3 VT_ARRAY|VT_VARIANT (8)
0 VT_R8 : 0.000000
1 VT_R8 : 0.000000
2 VT_R8 : 0.000000
3 VT_R8 : 0.000000
4 VT_R8 : 0.000000…
4 VT_ARRAY|VT_VARIANT (8)
0 VT_EMPTY
1 VT_EMPTY
2 VT_EMPTY
3 VT_EMPTY
4 VT_EMPTY……
-> 16:05:33 – Get for c3gWanCommonTable () had error : TOO BIG
-> 16:05:33 – Continuing get for c3gWanCommonTable ()
-> 16:05:33 – Get for ifTable () returned VT_ARRAY|VT_VARIANT (20)
0 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : 1
1 VT_BSTR : 2
2 VT_BSTR : 3
3 VT_BSTR : 4
4 VT_BSTR : 5…
1 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : GigabitEthernet0/0
1 VT_BSTR : Bluetooth0/4
2 VT_BSTR : Null0
3 VT_BSTR : unrouted VLAN 1
4 VT_BSTR : unrouted VLAN 1002…
2 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 6.000000
1 VT_R8 : 6.000000
2 VT_R8 : 1.000000
3 VT_R8 : 135.000000
4 VT_R8 : 135.000000…
3 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 1500.000000
1 VT_R8 : 1500.000000
2 VT_R8 : 1500.000000
3 VT_R8 : 1500.000000
4 VT_R8 : 1500.000000…
4 VT_ARRAY|VT_VARIANT (281)
Hi Craig, the Cisco Manager driver will combine data extracted through various protocols available on the product (HTTP, SNMP, CLI), and most of the data in the General tab is coming through SNMP. Do you confirm that SNMP is working correctly (port 161 open, R/W community strings correct) ?
It would help to show the Stream Viewer for this element (in the surveyor, right click on the element >> View >> StreamViewer) and post a screenshot here.
VT_BSTR : 4
4 VT_BSTR : 5…
1 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : GigabitEthernet0/0
1 VT_BSTR : Bluetooth0/4
2 VT_BSTR : Null0
3 VT_BSTR : unrouted VLAN 1
4 VT_BSTR : unrouted VLAN 1002…
2 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 6.000000
1 VT_R8 : 6.000000
2 VT_R8 : 1.000000
3 VT_R8 : 135.000000
4 VT_R8 : 135.000000…
3 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 1500.000000
1 VT_R8 : 1500.000000
2 VT_R8 : 1500.000000
3 VT_R8 : 1500.000000
4 VT_R8 : 1500.000000…
4 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 100000000.000000
1 VT_R8 : 100000000.000000
2 VT_R8 : 4294967295.000000
3 VT_R8 : 0.000000
4 VT_R8 : 0.000000……
-> 16:12:33 – Get for cpmCPUTotalTable () returned VT_ARRAY|VT_VARIANT (20)
0 VT_ARRAY|VT_VARIANT (4)
0 VT_BSTR : 19
1 VT_BSTR : 20
2 VT_BSTR : 21
3 VT_BSTR : 22
1 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1000.000000
1 VT_R8 : 2000.000000
2 VT_R8 : 3000.000000
3 VT_R8 : 4000.000000
2 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 0.000000
3 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 0.000000
3 VT_R8 : 1.000000
4 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 1.000000…
-> 16:04:44 – Get for xdsl2LineTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2LineBandTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2ChannelStatusTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2SCStatusTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2LineInventoryTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2PMLineCurrTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2PMLineInitCurrTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:44 – Get for xdsl2PMChCurrTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslSpanConfTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslSpanStatusTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslInventoryTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslEndpointConfTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslEndpointCurrTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslEndpointMaintTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for hdsl2ShdslUnitMaintTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for c3gWanCommonTable () had error : TOO BIG
-> 16:04:45 – Continuing get for c3gWanCommonTable ()
-> 16:04:45 – Get for c3gGsmRadioTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for cwceLteRadioTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:45 – Get for c3gCdma1xRttRadioTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:04:46 – Get for c3gCdmaEvDoRadioTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:03 – Get for ifTable () returned VT_ARRAY|VT_VARIANT (20)
0 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : 1
1 VT_BSTR : 2
2 VT_BSTR : 3
3 VT_BSTR : 4
4 VT_BSTR : 5…
1 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : GigabitEthernet0/0
1 VT_BSTR : Bluetooth0/4
2 VT_BSTR : Null0
3 VT_BSTR : unrouted VLAN 1
4 VT_BSTR : unrouted VLAN 1002…
2 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 6.000000
1 VT_R8 : 6.000000
2 VT_R8 : 1.000000
3 VT_R8 : 135.000000
4 VT_R8 : 135.000000…
3 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 1500.000000
1 VT_R8 : 1500.000000
2 VT_R8 : 1500.000000
3 VT_R8 : 1500.000000
4 VT_R8 : 1500.000000…
4 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 100000000.000000
1 VT_R8 : 100000000.000000
2 VT_R8 : 4294967295.000000
3 VT_R8 : 0.000000
4 VT_R8 : 0.000000……
-> 16:05:03 – Get for cpmCPUTotalTable () returned VT_ARRAY|VT_VARIANT (20)
0 VT_ARRAY|VT_VARIANT (4)
0 VT_BSTR : 19
1 VT_BSTR : 20
2 VT_BSTR : 21
3 VT_BSTR : 22
1 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1000.000000
1 VT_R8 : 2000.000000
2 VT_R8 : 3000.000000
3 VT_R8 : 4000.000000
2 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 0.000000
4 VT_ARRAY|VT_VARIANT (4)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 1.000000…
-> 16:05:03 – Get for cErrDisableIfStatusTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimInterfaceTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimJoinPruneInterval () returned VT_R8 : 60.000000
-> 16:05:28 – Get for pimNeighborTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimIpMRouteTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimIpMRouteNextHopTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:28 – Get for pimRPSetTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:29 – Get for pimCandidateRPTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:29 – Get for pimComponentTable () returned VT_ARRAY|VT_VARIANT (5)
0 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : 1
1 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : 0.0.0.0
2 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 0.000000
4 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 2.000000
-> 16:05:29 – Get for pimRPTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:29 – Get for cvVrfTable () returned VT_ARRAY|VT_VARIANT (7)
0 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : 1
1 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : Mgmt-vrf
2 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 1.000000
4 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : @…
-> 16:05:29 – Get for cvVrfListTable () returned VT_ARRAY|VT_VARIANT (0)
-> 16:05:29 – Get for cvVrfInterfaceTable () returned VT_ARRAY|VT_VARIANT (5)
0 VT_ARRAY|VT_VARIANT (1)
0 VT_BSTR : 1.1
1 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 3.000000
2 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 0.000000
3 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 3.000000
4 VT_ARRAY|VT_VARIANT (1)
0 VT_R8 : 1.000000
-> 16:05:29 – Get for cvInterfaceTable () returned VT_ARRAY|VT_VARIANT (3)
0 VT_ARRAY|VT_VARIANT (264)
0 VT_BSTR : 1
1 VT_BSTR : 2
2 VT_BSTR : 3
3 VT_BSTR : 9
4 VT_BSTR : 10…
1 VT_ARRAY|VT_VARIANT (264)
0 VT_R8 : 2.000000
1 VT_R8 : 2.000000
2 VT_R8 : 2.000000
3 VT_R8 : 2.000000
4 VT_R8 : 2.000000…
2 VT_ARRAY|VT_VARIANT (264)
0 VT_BSTR :
1 VT_BSTR :
2 VT_BSTR :
3 VT_BSTR :
4 VT_BSTR : …
-> 16:05:32 – Get for cefcFanTrayStatusTable () returned VT_ARRAY|VT_VARIANT (2)
0 VT_ARRAY|VT_VARIANT (12)
0 VT_BSTR : 1017
1 VT_BSTR : 1018
2 VT_BSTR : 1019
3 VT_BSTR : 2017
4 VT_BSTR : 2018…
1 VT_ARRAY|VT_VARIANT (12)
0 VT_R8 : 2.000000
1 VT_R8 : 2.000000
2 VT_R8 : 2.000000
3 VT_R8 : 2.000000
4 VT_R8 : 2.000000…
-> 16:05:33 – Get for cefcFRUPowerStatusTable () returned VT_ARRAY|VT_VARIANT (6)
0 VT_ARRAY|VT_VARIANT (8)
0 VT_BSTR : 1015
1 VT_BSTR : 1016
2 VT_BSTR : 2015
3 VT_BSTR : 2016
4 VT_BSTR : 3015…
1 VT_ARRAY|VT_VARIANT (8)
0 VT_R8 : 1.000000
1 VT_R8 : 1.000000
2 VT_R8 : 1.000000
3 VT_R8 : 1.000000
4 VT_R8 : 1.000000…
2 VT_ARRAY|VT_VARIANT (8)
0 VT_R8 : 2.000000
1 VT_R8 : 2.000000
2 VT_R8 : 2.000000
3 VT_R8 : 2.000000
4 VT_R8 : 2.000000…
3 VT_ARRAY|VT_VARIANT (8)
0 VT_R8 : 0.000000
1 VT_R8 : 0.000000
2 VT_R8 : 0.000000
3 VT_R8 : 0.000000
4 VT_R8 : 0.000000…
4 VT_ARRAY|VT_VARIANT (8)
0 VT_EMPTY
1 VT_EMPTY
2 VT_EMPTY
3 VT_EMPTY
4 VT_EMPTY……
-> 16:05:33 – Get for c3gWanCommonTable () had error : TOO BIG
-> 16:05:33 – Continuing get for c3gWanCommonTable ()
-> 16:05:33 – Get for ifTable () returned VT_ARRAY|VT_VARIANT (20)
0 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : 1
1 VT_BSTR : 2
2 VT_BSTR : 3
3 VT_BSTR : 4
4 VT_BSTR : 5…
1 VT_ARRAY|VT_VARIANT (281)
0 VT_BSTR : GigabitEthernet0/0
1 VT_BSTR : Bluetooth0/4
2 VT_BSTR : Null0
3 VT_BSTR : unrouted VLAN 1
4 VT_BSTR : unrouted VLAN 1002…
2 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 6.000000
1 VT_R8 : 6.000000
2 VT_R8 : 1.000000
3 VT_R8 : 135.000000
4 VT_R8 : 135.000000…
3 VT_ARRAY|VT_VARIANT (281)
0 VT_R8 : 1500.000000
1 VT_R8 : 1500.000000
2 VT_R8 : 1500.000000
3 VT_R8 : 1500.000000
4 VT_R8 : 1500.000000…
4 VT_ARRAY|VT_VARIANT (281)
![](https://community.dataminer.services/wp-content/uploads/wp-user-manager-uploads/2020/09/Jonathan-Triboulet.jpg)
Hi Craig, as the driver seems to respond properly, it may be due to a mismatch between your driver version and the FW installed on the switch, you probably want to look at the Catalog for a different version.
Hi Jonathan. Thank You for getting back. Are you talking a FW version of the switch, or Cisco Manager Driver? I have the latest Driver, and the switch is pretty up to date with it’s IOS. (16.12.4)
Hello, Worked with my support team and discovered that the LITE Protocol SNMP was the cause of truncated results. Thought I would share for anyone else who might be experiencing the same.
Craig
Correction, DataMiner version is 10.0.10.0-9454